Dan Connelly, Developer / Owner:

• Dan's Custom Golf Shop located in the quaint village of Hampton, ON. Canada.

• Proprietary Fitting / Assembly system - True Length Technology^®

• Proprietary Overall Shaft Profiling system - True Frequency Technology^®

• Life Member of the PGA Tour - Partners Club

Clubmaking Accreditations

Certified by The Ralph Maltby Clubmaking Academy in:      

       2001 - Professional Assembly & Repair      

       2003 - Professional Clubfitting      

       2004 - Dan was invited to attend Ralph Maltby's 'Masters Program' in Ohio becoming
                    only the 3rd person in Canada to obtain this status. This is the most elite
                   clubmaking program there is and is only available to individuals who have
                   proven their ability is of the highest regard.     

       2004 - Wrote the Golf Clubmakers Association (GCA) Exam earning both the Professional
                   & Advanced Certifications  - the highest available levels for Clubbuilders.      

       2005 - Trademark owner of 'True Length Technology™' A fitting system that puts every
                    club in the same hand position based on the proper length and lie angle for 
                    the individual. Please note that the clubs do vary in length, but not to the
                    traditional 1/2 inch incrument used throughout the industry. I devoted 3 years
                    of research knowing there had to be a better fit than what is currently available.
                    I always felt my long irons were too long and my short irons too short.
                    Please review my True Length Technology^® section to help you understand
                    what this system will do for you and your game.   

       2005 - Became a Certified Rifle Center for Frequency Matching Royal Precision Rifle
                   shafts. Rifle Shafts are now part of the True Temper Family of Golf Shafts.

       2007 - Joined the Professional Clubmakers Society (PCS) in Feb. 2007. I was fortunate
                   to be able to present True Length Technology™ at the annual expo to great
                   reviews from my clubmaking peers.

      2007 - Sponsor the Association of Golf Clubfitting Professionals (AGCP)
                   www.clubfitter.org  to help increase the awareness of a great Clubfitting.

      2007 - Awarded 'The Best New Fitting Idea - 2007' by the Association of Golf Clubfitting
                  Professionals (AGCP) on Dec. 11, 2007 at the annual Round Table Sessions

      2008 - Certified 36 Professional Clubmakers at the Association of Golf Clubfitting
                  Professionals RT event (AGCP) on Nov. 5, 2008 as Advance TLT Clubmakers

      2009 - Currently developing True Frequency Technology TM, overall shaft profiles - not butt frequency

Metrology Accreditatiion's

• Spent 20 years employed as a Metrologist for General Motors in the Canadian Regional Engineering Centre in Oshawa. As a Precision Inspector I operated CAD systems, Coordinate Measuring Machines and high level inspection tools on a daily basis. All part of holding the J.D. Powers 'Best In Class' which has been awarded to General Motors on many occations. I am proud to be a General Motors employee and their complete line of Quality Vehicles.
• Past Chairman (2 years) of the 'Association for Coordinate Metrology Canada' (ACMC).
  www.acmc-canada.ca This is a group of individuals devoted to correct metrology practices at the highest level. Colleagues include University Professors, Scientist's from the National Research Council and dimensional experts from around the world.
• Graduate of Durham College (1980) from the 3 year Mechanical Technology Program.
• High accuracy measurements, calculations and precision metrology are all daily practices to Dan.

Now this level of dimensional integrity has been taken to golf club assembly, fitting and repair!

This proprietary fitting, assembly system will help all levels of players.  

• Can you imagine owning a set of clubs, where every club's length places the grip perfectly
  in your hands - in the same playing position every time? 
• Every club set to your perfect math model - resulting in optimum playing lengths and lies
  for every club. 
• Imagine the repeatability and consistency that comes naturally with playing a set of clubs
  tuned to you and you alone.

Dan's Custom Golf Shop offers our customers the choice of shafts, grips and club heads that best suit the needs of each player, all built to 'True Length Technology^®." 

We do not include prices in this site as a fully customized set cannot be prices as a shelf item.

Due to many requests, Dan’s Custom Golf Shop has decided to add an

‘OnLine Fitting Program’  

PayPal

Steps you will need to follow

• Fill out the on line Evaluation Form www.danscustomgolfshop.com/evaluation.html
• If you know the length and lie of your favorite club, this often helps. Please inform me of any
  special circumstances that may influence your fitting
• We may need to ‘back and forth’ a few Emails or phone calls to get all the data I need to
  fit you to your math model
• Don't want to use the Pay Pal Link - Marianne is available most times, and we can process
  within a few days. Call with your Visa or MasterCard - Call 905-263-8510

If you are not a Clubmaker, I recommend that you find one to take your TLT Specifications to at:

AGCP Clubmaker www.clubfitter.org

This way, your clubs will be professionally altered or built by a Certified Technician. Please inform the Clubmaker of the merits and advantages of building to the True Length Technology^® Math Model and how to get hold of me danscustomgolfshop@hotmail.com for clarification.

Note: You will have to negotiate your own deal with your Clubmaker as to the cost of the alteration or assembly.

I will do my best to match you and your address position up with a TLT Series Chart that should help you develop a constant - stable address position. Due to the lack of any personal observations or hands on fitting, and based on the accuracy of the information I am supplied by you, I cannot guarantee that this will be a ‘perfect’ fit, but I can guarantee that I will do my best. There are many factors in determining the best fit, so the more information I have, the better the chance.

The charts will not be my full Clubmakers Package - available at www.danscustomgolfshop.com/registry.html

but rather an edited TLT Fitting Package version. I will supply the required lengths for your complete set including your driver, fairway woods, hybrids, irons and putter. Target lie angles for your irons will also be specified, but keep in mind that dynamic testing is recommended for final lie angles positions.

This is the first step at moving your game to the next level.

Please note: Due to the lack of personal observations, I can accept no responsibility or liability for the assembly or accuracy of your set. The fitting is performed in good faith and you do have my word that I will do my best based on the information I have. These charts are the Proprietary Property of Dan Connelly and Dan’s Custom Golf Shop, and cannot be given away or sold. The True Length Technology^® System is Copyright Protected. Please honor the agreement.

Thank you,

Dan

BACK TO TOP

^{TM / ®} True Length Technology is a Trademark of Dan's Custom Golf Shop.